| Reverse Breakdown Voltage, VR | 6V | |
| Forward Current, IF Continuous Peak (PW, 1µs; </= 33Hz) |
60mA 3A | |
| Power Dissipation, PD | 100mW | |
| Derate Linearly Above +25°C | 1.33mW/°C | |
| Operating Temperature Range, Topr | -55° to +100°C | |
| Storage Temperature Range, Tstg | -55° to +100°C | |
| Lead Temperature (During Soldering, 1/16" from case, 5sec), TL | +240°C |
Electrical Characteristics: (TA = +25°C, Note 1 unless otherwise specified)
| Parameter | Symbol | Test Conditions | Min | Typ | Max | Unit |
| Forward Voltage | VF | IF = 60mA | - | - | 1.7 | V |
| Reverse Breakdown Voltage | VR | IR = 10µA | 6 | - | - | V |
| Reverse Leakage Current | IR | VR = 5V | - | - | 10 | µA |
| Peak Emission Wavelenght | IF = 100mA | - | 940 | - | nm | |
| Emission Angle at 1/2 Power | - | ±35 | - | deg. | ||
| Radiant Intensity | Ie | IF = 20mA, Note 2 | 0.28 | - | - | mW / Sr |
| Note 1. | All measurements are made under pulse conditions. |
| Note 2. | Radient Intensity is measured with a 0.45cm aperature placed 1.6cm from the tip of the lens centerline perpendicular to the plane of the leads. |
