"This is a stereo transmitter! Just connect a cassette deck, CD player, MP3 player or mixer panel to the FM-10A's line level inputs and you're on-the-air with a school, dorm, camp, home, church or neighborhood FM station.
Tunable anywhere in standard FM band... 88 to 108 MHz
Operates on 5 to 15V DC
Standard line level inputs with RCA phono jacks
Settable pre-emphasis 50 or 75 Sec for use anywhere in the world
Adjustable input sensitivity and stereo balance
Easy to build, low cost transmitter
FCC Approved
RF Output: 10mW Range: up to 200 feet
The FM-10A has plenty of power and our manual goes into great detail outlining all the aspects of antennas, transmitting range and the FCC rules and regulations. You'll be amazed at the exceptional audio quality of the FM-10A, in fact, your station will sound better than most stations on the dial! This is because in their quest for ever higher ratings, FM broadcasters crank up the average level of their modulating signal in order to sound 'louder'. This produces noticeably more muddy and constrained sound than your signal!
Whether you set up a wireless extension of your home stereo, dorm radio station, or simply transmit radio calls (2 meters on the left, 440 on the right - stereo, remember?) you'll find lots of fun and satisfying uses for this most popular kit.
Runs on internal 9V battery or external power from 5 to 15V DC.
We offer the manual in Adobe Acrobat PDF format right here! The manual is complete, with the exception of the schematics.
If you want excellent quality sound with no frequency drift try R-FM25 Tunable FM transmitter assembled
Optional: (But highly recommended!)
Small antenna and Case (size 5""w x 1-1/2""h x 5-1/4""d)
12V AC adapter
Can be ordered assembled (like the picture). Includes
Transmitter, Case, and small Antenna. You must choose a frequency between
these 3 ranges: 88-94, 91-100, or 95-108Mhz(We need to know which range
when we assemble the unit, it can always be changed later by switching a
capacitor). "
|